YOKOMO Auto-Detect Balance Charger (YZ-114PLUS) [SPECIAL FEATURES] ■Battery Charge/Discharge Profiles YZ-114PLUS can store up to 10 profiles for either charging or discharging in memory. ■Terminal Voltage Control (TVC) Expert users can set the end voltage for the charge process. ■Internal Lithium Battery Balancer YZ-114PLUS comes equipped with an individual-cell voltage balancer. Using an external balancer for balance charging is not necessary. ■Support for Balance Discharging YZ-114PLUS can monitor and balance the voltage of each cell individually during the discharging process. A safety feature will automatically stop the discharge process if any of the cells exhibits an abnormal voltage. ■Support for Multiple Types of Lithium Batteries YZ-114PLUS supports various lithium batteries including LiPo, LiIon, and LiFe. ■Standard Equipped with LiHV Mode YZ-114PLUS supports "LiHV" batteries; the new generation of LiPo batteries which have an end charge voltage of 4.35 V. ■Fast Charge and Storage Charge Modes for Lithium Batteries YZ-114PLUS comes equipped with a Fast Charge mode to reduce charging times for batteries which support fast charging. In addition, a Storage mode is available to adjust the final voltage of the battery to an optimal level to extend the useful life of the battery while being stored. ■Re-peak Mode for NiMH and NiCd Batteries In re-peak mode, the charge will perform a peak charge on the battery 1 to 3 times in a row automatically. This mode can be used to ensure that a battery will be fully charged. ■Adjustable Delta-peak Sensitivity for NiMH and NiCd Batteries YZ-114PLUS supports "LiHV" batteries; the new generation of LiPo batteries which have an end charge voltage of 4.35V. ■Cycling Charge and Discharge Processes YZ-114PLUS is equipped with automatic cyclic charge and discharge mode which can be performed 1 to 5 times in a row. This process can be performed to refresh and balance the battery in order to stimulate its activity. ■Automatic Charging Current Limit With YZ-114PLUS, it is possible to set the maximum charging current for NiMH and NiCd batteries. This is useful for charging NiMH batteries with low internal resistance and capacity while using the "AUTO" charging mode. ■LiPo Battery Meter YZ-114PLUS contains a battery meter that can be used to check the battery's total voltage, along with the highest and lowest voltage along with the voltage of each of the individual cells. ■Battery Internal Resistance Meter YZ-114PLUS contains a battery internal resistance meter that can be used to check the battery's total internal resistance, along with the internal resistance of each of the cells. ■Charge Capacity Limit An user-adjustable charge capacity limit can be set to automatically terminate the charge process when the set charge capacity is reached. ■Temperature Limit Batteries warm up while charging and discharging. By using this feature, if the battery heats up to a set temperature the process will be stopped. Note: Optional temperature sensor (Part No. YZ-114P-2) is required to use this feature. ■Processing Time Limit Using this feature, when the charge or discharge process takes longer than the set time, the process will be automatically stopped.